| Brand Name: | Capdisp |
| Model Number: | customizable |
| MOQ: | Negotiate |
| Price: | Contact us |
The TR24 is a shunt-based battery monitor for 8–100 V packs, supporting up to 0–500 A depending on the matched shunt. It is a circular IP68 panel meter with a color TFT readout of voltage, current, remaining capacity, and power.
The TR24 is a coulomb meter (shunt-based battery monitor). A shunt in the main current path produces a small voltage drop; the meter converts that into amperes and integrates charge in and out over time to estimate state of charge (SOC).
That matters on LiFePO₄ and other flat-curve chemistries: terminal voltage barely moves between roughly 20% and 80% SOC, and it also sags under load. A voltage-only gauge can look "full" or jump around even when the pack is not. Because the TR24 counts amp-hours at the battery (provided every load and charger passes through the shunt), the SOC reading stays usable while you drive, charge, or run an inverter.
Installation is still a shunt job: put the shunt first on the battery negative so nothing bypasses it, then set capacity and chemistry before the first synchronisation charge. Wrong wiring or an oversized shunt will show up as missing current or coarse low-current resolution — not as a "software problem."
| Item | Value | Note |
|---|---|---|
| Brand | Capdisp | |
| Model | TR24 | |
| Display | Color TFT LCD | |
| Form | Circular panel meter | Snap-in / clip mount |
| Working voltage | 8–100 V DC | |
| Current (with shunt) | 0–500 A | Depends on the matched shunt |
| Capacity range | 0.1–9999 Ah | |
| Accuracy (V / I / Ah) | ±1% typical | See the datasheet |
| Readings | Voltage, current, remaining capacity, power | |
| Protection | IP68 | Up to about 1 m under specified test conditions; see the datasheet |
| Other functions | Adjustable sleep brightness, turn-on current, low-capacity alert, menu password | |
| OEM options | Custom UI and communication protocol | |
| Power use | ~750 mW @ 50% backlight; ~1000 mW @ 100%; sleep ~300 mW (0%) / ~450 mW (2%) | |
| Operating temp | −10–50 °C ambient | |
| Dimensions | 72.5 * 72.5 * 20.75 mm | |
| Panel cutout | 67.3 * 67.3 mm | Verify against the installation drawing before cutting |
| Certifications | CE, RoHS | |
| Origin | Shanghai, China | |
| Chemistries | Lead-acid, Li-ion, LiFePO₄, sodium-ion and similar | |
| MOQ | 1 pc sample * OEM MOQ on request |
Choose the TR24 when the display sits in weather, wash-down, or splash — not because "waterproof" is a slogan, but because a standard indoor panel meter is the wrong part.
If the panel stays dry indoors and you only need a small 150 A meter, a compact model such as the TC169 is usually a better fit. The TR24 is the weather-exposed, higher-current option.
If you need usable SOC on LiFePO₄, or under charge and load, use a shunt-based coulomb meter. A voltage-only gauge often misreads flat LFP curves and sags. Choose the TR24 when that meter also has to live on a weather-exposed or wash-down panel.
Current range depends on the matched shunt, up to 0–500 A. Send pack voltage and maximum continuous / peak current, and we will recommend a matching shunt. Do not pick the largest shunt "to be safe": too much range coarsens low-current resolution (parasitic drain becomes harder to see). For the selection method and current ranges, see How to choose the appropriate shunt specification?.
The TR24 is rated IP68, with protection stated up to 1 m under specified test conditions. That rating is not a licence to run the meter permanently submerged, or to ignore cable-gland and cutout sealing. See the datasheet for test depth, duration, and which part of the assembly the rating covers.
Prepare a 67.3 * 67.3 mm cutout (verify against the installation drawing), insert the meter from the front, and fasten the rear clips. Keep sense leads away from inverter or motor cables, and land chassis grounds on the load side of the shunt so current is not bypassed.
The TR24 is specified for lead-acid, lithium-ion, LiFePO₄, and sodium-ion packs. Set the correct type, capacity, and charge parameters before the first full-charge synchronisation.
Bluetooth and Wi-Fi are not included on the TR24. If you need app or remote connectivity, ask us for the appropriate model (for example a BT/Wi-Fi meter or a communications module).
Yes. UI, communication protocol, and OEM pricing are available on request. Send your target market, annual volume, and any protocol requirement.
Tell us your pack voltage, maximum current, cutout limits, and whether the panel is weather-exposed. We will confirm the TR24 configuration, shunt option, and datasheet, then quote samples or OEM volumes.